Frequently asked questions about used conveyor belts
To buy used conveyors with good quality, you should only buy from reputable used conveyor suppliers. There, you are assured of quality as well as reasonable prices.
Buying used industrial equipment can cause a few concerns, which is understandable. Are used old conveyor belts still highly efficient and economically beneficial compared to brand new belt conveyors? Industries such as material handling, mechanics, automation, etc. use conveyors in production and assembly units. The importance of conveyors has increased due to the implementation of automation in industrial systems. Considering these factors, choosing the right conveyor belt is very important. When buying used conveyor belts, many factors need to be considered.
The following are questions that buyers ask when choosing used conveyors.
1 - Should you buy used conveyor belts?
There are a few reasons why used conveyor belts can offer many benefits over new ones.
- Used belt conveyors cost much less than new ones. Because it is used industrial equipment, the cost of the equipment is reduced, but the efficiency is not reduced much.
- Used conveyors are always available. Unlike new conveyors, used conveyors do not require production time leading to a reduction in final product delivery time.
- The performance of the used conveyor has been tested by the previous user. Therefore, the functional data and parameters recorded by the first user can give you an accurate idea of the operation of the used conveyor.
2 - How much money can be saved buying used conveyors?
All in all, you can expect almost 30-40% less cost than a new conveyor if you buy a used conveyor. However, used conveyor prices can vary depending on supplier and delivery requirements.
3 - Is the maximum load capacity of the used conveyor still the same as new?
The maximum load-carrying capacity of the conveyor belt remains the same throughout its life. Conveyor belts are specifically designed for calculated load capacity versus calculated life. Therefore, the load capacity of the used conveyor is expected to be close to that of the new conveyor. Power is expected to be slightly skewed due to operational losses.
![Băng tải cũ đã qua sử dụng]()
4 - Can the used conveyor system be customized?
The conveyor system used can be customized for specific applications. Components like motor, pulley,... can be changed based on custom requirements. Parameters such as belt inclination, roller support, etc. can be managed based on operational requirements.
5 - How to choose the correct used conveyor for the applications?
Choosing a used conveyor is the same as choosing a new one. You need to consider the following factors:
- Weight
- Power requirements
- Belt and pulley size
- Maximum operating speed
- Resistant to external factors such as rust, oil, chemicals, etc.
- Overall efficiency and performance parameters
6 - Is installation and maintenance service available for used conveyors?
No matter new or redundant, belt conveyors require proper installation and maintenance service. As continuously operating mechanical units, conveyors occasionally require vendor-supplied troubleshooting and maintenance. In addition, the installation of a conveyor system requires skilled labor and adjustment calculations, so installation services are usually provided by the supplier.
7 - How to ensure the quality and performance of the used conveyor belt?
To ensure the quality of used conveyors, while sourcing equipment, you should ask the supplier for performance data sheets and inspection and test reports.
To buy used conveyors with good quality, you should only buy from reputable used conveyor suppliers. There, you are assured of quality as well as reasonable prices.
One piece of advice: Buy a new conveyor with design and installation requirements tailored to your needs for maximum efficiency. Newly designed conveyor belt according to your requirements, you can both ensure quality and enjoy a full range of modes from equipping with knowledge of selection, operation, and troubleshooting common problems. In particular, the conveyor belt warranty is always performed as promised.
Frequently asked questions about used conveyor belts
The following are questions that buyers ask when choosing used conveyors.
1 - Should you buy used conveyor belts?
There are a few reasons why used conveyor belts can offer many benefits over new ones.
- Used belt conveyors cost much less than new ones. Because it is used industrial equipment, the cost of the equipment is reduced, but the efficiency is not reduced much.
- Used conveyors are always available. Unlike new conveyors, used conveyors do not require production time leading to a reduction in final product delivery time.
- The performance of the used conveyor has been tested by the previous user. Therefore, the functional data and parameters recorded by the first user can give you an accurate idea of the operation of the used conveyor.
2 - How much money can be saved buying used conveyors?
All in all, you can expect almost 30-40% less cost than a new conveyor if you buy a used conveyor. However, used conveyor prices can vary depending on supplier and delivery requirements.
3 - Is the maximum load capacity of the used conveyor still the same as new?
The maximum load-carrying capacity of the conveyor belt remains the same throughout its life. Conveyor belts are specifically designed for calculated load capacity versus calculated life. Therefore, the load capacity of the used conveyor is expected to be close to that of the new conveyor. Power is expected to be slightly skewed due to operational losses.
4 - Can the used conveyor system be customized?
The conveyor system used can be customized for specific applications. Components like motor, pulley,... can be changed based on custom requirements. Parameters such as belt inclination, roller support, etc. can be managed based on operational requirements.
5 - How to choose the correct used conveyor for the applications?
Choosing a used conveyor is the same as choosing a new one. You need to consider the following factors:
- Weight
- Power requirements
- Belt and pulley size
- Maximum operating speed
- Resistant to external factors such as rust, oil, chemicals, etc.
- Overall efficiency and performance parameters
6 - Is installation and maintenance service available for used conveyors?
No matter new or redundant, belt conveyors require proper installation and maintenance service. As continuously operating mechanical units, conveyors occasionally require vendor-supplied troubleshooting and maintenance. In addition, the installation of a conveyor system requires skilled labor and adjustment calculations, so installation services are usually provided by the supplier.
7 - How to ensure the quality and performance of the used conveyor belt?
To ensure the quality of used conveyors, while sourcing equipment, you should ask the supplier for performance data sheets and inspection and test reports.
Epilogue
To buy used conveyors with good quality, you should only buy from reputable used conveyor suppliers. There, you are assured of quality as well as reasonable prices.
One piece of advice: Buy a new conveyor with design and installation requirements tailored to your needs for maximum efficiency. Newly designed conveyor belt according to your requirements, you can both ensure quality and enjoy a full range of modes from equipping with knowledge of selection, operation, and troubleshooting common problems. In particular, the conveyor belt warranty is always performed as promised.
